JVC YU30052-625-1 - Manual (Page 7)

EN
7
Indoor Use
When using the camcorder indoors, you can use
the AC Adapter instead of a battery.
1 SUPPLY POWER TO ADAPTER
Connect the power cord between the AC
Adapter and an AC outlet.
2 SUPPLY POWER TO CAMCORDER
Connect the AC Adapter to the camcorder.
GETTING STARTED
Using The CAM Stand
During Recording
If you record while leaving the camcorder on a desk
or table, it may tip or be accidentally knocked over.
Attach it to the CAM Stand before this type of use.
1 SUPPLY POWER
Plug the DC Power Cord into the camcorder.
2 ATTACH TO CAM STAND
Attach as shown in the illustration, paying
particular attention to the DC Power Cord.
MIC
AV-OUT
DC-IN 6V
To AC outlet
POWER CORD
AC POWER
ADAPTER/CHARGER
DC CORD CAM STAND
Connector is under this cover