JVC YU30052-625-1 - Manual (Page 53)

EN
53
T W
1
2
3
4
5
6
7
8
T I ME CODE 15 : 55
TOT AL 09 : 02
00 : 25 ~ 02 : 05
07 : 18 ~ 08 : 31
03 : 33 ~ 05 : 53
09 : 30 ~ 13 : 15
15 : 55 ~
~
~
~
P
B/W
P
I N
W H
OUT MODE
:
9 PREPARE SOURCE TAPE
Rewind the tape in the camcorder to the
beginning of the scene you want to edit and
press PAUSE.
10 ENGAGE VCR'S RECORD-PAUSE
MODE
Point the remote control toward the VCR's
infrared sensor and press VCR RECORD/
STANDBY, or manually engage the VCR's
Record-Pause mode.
11 START EDITING
Press EDIT on the Docking Station. Editing
proceeds as programmed, right through to the
end of the last registered scene.
•If you selected a Fade/Wipe effect, it is active
between selected scenes during dubbing.
•If you selected a P.AE/Effect, it is active
during scenes while dubbing.
•When dubbing is complete, the camcorder
enters the PAUSE mode, and the recorder
enters its RECORD/STANDBY mode.
•If you don’t register an Edit-Out point, the
tape will be dubbed all the way to the end
automatically.
12 STOP EDITING
Engage the STOP modes for the camcorder and
the recorder.
NOTES:
● During dubbing, make sure the remote control is
pointed at the recorder’s sensor, and that the path
between the two is unobstructed.
● If, during dubbing, you press a button on the
camcorder, its RECORD/STANDBY mode is
automatically engaged.
● Random Assemble Editing may not function
properly when using a tape including several
duplicated Time Codes. ((
੬
pg. 26)
● When using MOSAIC FADER, black bars may
appear at the bottom and left of the screen.
FF
R.A.EDIT PROGRAM SCREEN
VCR RECORD/STANDBY
EDIT
STOP
FADE/WIPE
EFFECT
EDIT IN/OUT
RM-V708U
(provided)
REW