JVC HM-DR10000EK - Manual (Page 67)

67
SET JUST CLOCK
6
The default setting is “ON”. Set as desired by pressing
%fi, then press OK or #.
● For the Just clock function, ੬ "Just Clock" on page 66.
● If you set to “OFF”, you can disregard the next step as
you won’t be able to receive regular clock adjustments.
SET CLOCK DATA SOURCE
PRESET
7
The recorder is preset to receive clock setting and
adjustment data from preset position 1. Press
%fi to set
the preset position to the number representing the
station transmitting clock setting data (BBC1, BBC2,
etc.), then press OK or
#.
START CLOCK OPERATION
8
Press MENU.
1 2 3
4 5 6
7 8 9
1
2
1
2
3
– –:– –
0
3
4
4
OK
MENU
NOTES:
● Just Clock (when set to "ON") adjusts the recorder's built-in
clock every hour, except for 23:00, 0:00, 1:00 and 2:00.
● Just Clock is not effective when . . .
– the recorder’s power is on.
– the recorder is in the Timer mode.
– a difference of more than 3 minutes exists between the
built-in clock’s time and the actual time.
– the recorder is in the Auto Satellite Prog Rec mode
(
੬
␣ pg.␣ 40).
● If Just Clock is set to "ON", the recorder’s clock is automati-
cally adjusted at the start/end of Summer Time.
● Just Clock may not function properly in poor reception
conditions.