JVC Everio GZ-MG255U - Manual (Page 22)

22
Manual Setting in Function Menu
You can use manual recording functions
easily by selecting items in the function
menus.
After performing “To Change to Manual
Recording Mode” (
੬ pg. 20)
1
FUNCTION
FOCUS
ADJUST BRIGHTNESS
TELE MACRO
EFFECT
WB
APERTURE PRIORITY
SHUTTER SPEED
2
Select the desired menu.
For details on each menu, see below.
Select
Set
ADJUST BRIGHTNESS
AUTO
0
3
Select the desired setting.
Select
Set
ADJUST BRIGHTNESS
AUTO
0
Depending on the kind of settings you
select, you can set the value by moving the
set lever to / after selecting.
4
FUNCTION
16:9
2
The menu disappears and the indicator for
the set function appears.
8 To return to the previous screen
Move the set lever to .
8 To exit the screen
Press FUNCTION.
Manual Recording (Continued)
Menus Settings: [ ] = Factory-preset
FOCUS
Adjusts the focus.
[AUTO] : The focus is adjusted automatically.
: Adjusts the focus manually. Move the set lever to /
to set the focus. (When zooming, the subject will not go out of
focus if you adjust the focus at the telephoto (T) side before
zooming to the wide-angle (W) side.)
ADJUST BRIGHTNESS
Adjusts the brightness.
For mode
[AUTO] : The brightness is adjusted automatically.
–6 to +6 : Corrects the brightness within this range in increments
of 1. Move the set lever to / to set the value.
For mode
[±0] : The brightness is not adjusted.
–2.0 to +2.0 (EV) : Corrects the brightness within this range in
increments of 1/3EV. Move the set lever to / to set the
value.
8 To lock the exposure
When the menu disappears after you fi nish confi guring the
setting, press and hold the set lever for more than 2 seconds.
The indicator appears.