JVC Everio GZ-MG255U - Manual (Page 17)

17
ENGLISH
Still Image Recording
Preparation: Set the power/mode switch to ON.
Slide the power/mode switch to
MODE to select
(still image)
mode.
MODE
OFF
ON
The switch returns
to the original
position when it is
released.
The lamp on the camera lights up.
Press the PLAY/REC button to
select recording mode.
PLAY/REC
SELECT [ 9 9 9 9 ] FINE 640
Press and hold the SNAPSHOT
button halfway.
[ FINE 640
The indicator becomes green when
the captured image is focused.
Press the SNAPSHOT button to
start recording.
[ 9 9 9 9 ] FINE 40
NOTE
If the camera is not operated for 5 minutes while the power is on, it turns itself off automatically to
conserve power. To turn the camera on again when using the battery pack, set the power/mode switch
to OFF, then to ON. When using the AC adapter, perform any operation such as zooming.
8 To change the picture quality
Change the settings in [QUALITY].
(
੬ pg. 47)
8 To record still images continuously
Set [CONTINUOUS SHOOTING] to
[ON]. (
੬ pg. 48)
8 To change the image size
Change the settings in [IMAGE SIZE].
(
੬ pg. 47)