JVC DT-V1910CG - Manual (Page 51)

17
ENGLISH
Ⅵ SAFETY AREA/R-SAFETY AREA
Displays dotted lines to indicate the areas
corresponding to 80%, 88%, or 90% of the screen
size (the aspect ratio setting in “ASPECT SELECT/
R-ASPECT SELECT”).
OFF: SAFETY AREA does not function.
90%: Marked area is 90% of the 16:9 screen ratio.
88%: Marked area is 88% of the 16:9 screen ratio.
80%: Marked area is 80% of the 16:9 screen ratio.
NOTES:
• When a picture of 4:3 aspect ratio is input, SAFETY AREA for 4:3
screen is displayed.
• To display SAFETY AREA for 16:9 screen ratio when a picture of
16:9 aspect ratio is input, set “MARKER SELECT/R-MARKER
SELECT” to OFF. (In this case, setting of ASPECT SELECT is
invalid.)
Input Signal Format Standard Manual
setting setting
(MANUAL)
NTSC, PAL, 480/60i,
ITU601
480/60p, 576/50i, 575/50p
ITU709
720/60p, 1080/50i, 1080/60i,
ITU709
1035/60i, 1080/24psF
SELECT :MANUAL
R-Y PHASE : 90
R/B GAIN :0.86
G-Y PHASE : 244
G/B GAIN :0.36
sub menu
reset
EXIT: MENU ADJUST:- + SELECT:
COLOR MATRIX
Selects or adjusts the standard of the colour
demodulation (colour rendering).
Press the button to
display the setting menu
illustrated on the right.
The menu screen when
MANUAL is selected.
● The standard setting is set to “ITU601” or “ITU709”
depending on the input signal format.
The factory preset of MANUAL is ITU709
R-Y PHASE 90
ITU601
R/B GAIN 0.79
G-Y PHASE 244
G/B GAIN 0.45
R-Y PHASE 90
ITU709
R/B GAIN 0.86
G-Y PHASE 244
G/B GAIN 0.30
Ⅵ SELECT
Selects the picture matrix standard.
ITU601 or ITU709 : Standard setting
MANUAL
: Manual setting
NOTE :
The following items are displayed when MANUAL is selected.
When ITU601 or ITU709 is selected, they are not displayed.
Ⅵ R-Y PHASE
Sets the R-Y phase.
• 90/92/94/112
Ⅵ R/B GAIN
Sets the R/B gain.
• 0.86/0.56/0.68/0.79
Ⅵ G-Y PHASE
Sets the G-Y phase.
• 244/253/236/240
Ⅵ G/B GAIN
Sets the G/B gain.
• 0.30/0.34/0.40/0.45
LCT1423-001A_p2-17 4/29/03, 5:04 PM 17