JVC LVT1627-001A - Manual (Page 221)

95
Menu items Selectable settings (Initial setting)
Setup
]
Others
Beep Off: Cancels.
On: Activates the key-touch tone.
Telephone Muting You can mute the sound of the System (AV source sounds
and voice guidance) while you talk on the mobile phone.
Off: Cancels.
Muting1, Muting2: Select either one which mute the
sounds while using the mobile phone. *13
Reverse Polarization Select either of the two which indicates your gear direction
correctly.
GND, Battery
Connection *14 You can check the connection status.
EQ
Flat, Hard Rock, R&B, Pop, Jazz, Dance Music,
Country, Reggae, Classic, User 1, User 2,
User 3 ☞ [98]
Sound
Fader/Balance Adjust fader—speaker output balance between the front
and rear speakers. (00)
F06: front only
R06: rear only
• When using a two-speaker system, set the fader to the
centre (00).
Adjust balance—speaker output balance between the left
and right speakers. (00)
L06: left only
R06: right only
Volume Adjust Adjust and store auto-adjustment volume level for each
source, comparing to the FM volume level. The volume
level will automatically increase or decrease when you
change the source.
–12 to +12 (00)
Subwoofer Adjust the settings below in the submenu:
• Phase: Subwoofer phase. Select either Normal or
Reverse, which reproduces a better sound.
• Level: Subwoofer output level. 00 to 08 (04)
Fader/Balance
Exit
F02
L02
AV Menu items
*13 The TEL MUTING lead connection is required. (☞ Installation/Connection Manual)
*14 This shows the same information as Connection in the Information Menu (☞
[43]).
KDNX5000_E_eng.indb 95 KDNX5000_E_eng.indb 95 14/2/07 10:00:03 pm 14/2/07 10:00:03 pm