Initial settings – JVC LVT1627-001A User Manual

Page 134

ENGLISH

Initial settings

When you turn on the unit for the first time, the initial setup screen appears. Follow the procedure
below and make necessary settings.

Reverse Polarization

Engage the parking brake, step on the
brake pedal, then switch the gear lever.
If Forward and Reverse alternates
on the display, connection is correct.
Select one of the alternatives (GND or
Battery) that shows the gear position
correctly.

You can also change these settings (except
Store Display Mode) through Setup
Menu and AV Menu when necessary.
• Language ☞ [46]
• Installation Angle ☞ [46]
• Reverse Polarization ☞ [95]

Back to the previous setting

Select an item

Proceed to the next setting

Turn on the power.

Adjust the following settings.

Finish the procedure.

Language 1/2

Dansk
Deutsch

English UK

English US
Español

Language

Select the language you want for the
display and the voice guidance.

Store Display Mode

Select Off.
• If you select On, the System starts in

the navigation demonstration mode
for shops. (☞ [47])

Installation Angle

Select which angle your unit is installed
at. This setting is necessary for the
precise functioning of the Navigation
System.
• See “Measuring the installation

angle” on the Installation/Connection
Manual.

KDNX5000_E_eng.indb 8

14/2/07 9:58:33 pm