Integra DTR-5.9 - Manual (Page 64)

64
Listening to the Radio —Continued
SIRIUS Satellite Radio Messages
The following messages may appear while using
SIRIUS Satellite Radio.
❑ ACQUIRING
The SiriusConnect receiver is acquiring the signal or
no signal is present. Make sure the SiriusConnect
Home tuner is connected properly and that there are
no obstacles close by.
❑
ANTENNA ERROR
Make sure the SiriusConnect Home tuner is con-
nected properly.
❑
SUB UPDATED
Displayed while your subscription is being updated.
No operations can be performed until this message
has cleared.
❑
UPDATING XXX%
Displayed while the channel map is being updated.
Wait until the updating is complete.
❑ SIRIUS UPDATING
Displayed while the SiriusConnect receiver’s firm-
ware is being updated.
❑
INVALID CHANNEL
Displayed if you select an unavailable channel.
❑
CALL SIRIUS
Displayed when you select a channel to which you
are not subscribed. Call SIRIUS if you want to sub-
scribe.
❑ CHECK SR TUNER
Displayed if the SiriusConnect receiver is not con-
nected. Make sure the SiriusConnect receiver is con-
nected properly, and make sure its AC adapter is
plugged in.
4 Use the Up and Down [ ]/[ ]
buttons to select “Antenna Aim-
ing,” and then press [Enter].
The Antenna Aiming screen appears.
Position the SiriusConnect Home
antenna so that as many bars as
possible (up to 3) appear on the
SIRIUS Satellite signal strength
meter.
If you cannot receive a satellite signal,
position the SiriusConnect Home
antenna so that as many bars as possible
(up to 3) appear on the SIRIUS Terres-
trial signal strength meter.
Antenna Aiming
SIRIUS
Satellite Terrestrial
SIRIUS ID 000000000000