Integra DTR-5.9 - Manual (Page 26)

26
Connecting Your Components —Continued
Hooking Up the Multichannel Input
If your DVD player supports multichannel audio formats such as DVD-Audio and SACD, and it has a multichannel
analog audio output, you can connect it to the AV receiver’s multichannel input.
Use a multichannel analog audio cable, or several normal audio cables, to connect the AV receiver’s DVD IN FRONT
L/R, CENTER, SURR L/R, SURR BACK L/R, and SUBWOOFER jacks to the 7.1-channel analog audio output on your
DVD player. If your DVD player has a 5.1-channel analog audio output, don’t connect anything to the AV receiver’s
SURR BACK L/R jacks.
To select the multichannel input, see “Basic AV Receiver Operation” on page 48. To adjust the subwoofer sensitivity for
the multichannel input, see “Hardware Setup” on page 89.
ANTENNA
FM
AM
75
SIRIUS
FRONT CENTER
SUB
WOOFER
SURR
DVD
SURR BACK
R
FRONT
L L R
SURROUND CENTER SUB
WOOFER
R
L
R
L
L R
SURR
BACK
5.1 ch
7.1 ch
DVD player