Integra DTR-5.9 - Manual (Page 45)

45
First Time Setup —Continued
If you connect a video component to a COMPONENT
VIDEO IN, you must assign that input to an input
selector. For example, if you connect your DVD player
to COMPONENT VIDEO IN 2, you must assign COM-
PONENT VIDEO IN 2 to the DVD input selector.
These are the default assignments.
Note:
• This procedure can also be performed on the AV
receiver by using its [Setup], [Enter], and arrow but-
tons.
If you connect a component to a digital audio input, you
must assign that input to an input selector. For example,
if you connect your CD player to OPTICAL IN 1, you
must assign OPTICAL IN 1 to the CD input selector.
These are the default assignments.
Component Video Input Setup
Input selector Audio input
DVD IN1
VCR/DVR - - - - -
CBL/SAT IN2
Game/TV - - - - -
AUX - - - - -
Tape - - - - -
CD - - - - -
1 Press the [Receiver] button, fol-
lowed by the [Setup] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
2 Use the Up and Down [ ]/[ ]
buttons to select “1. Input
Assign,” and then press [Enter].
3 Use the Up and Down [ ]/[ ]
buttons to select “1-2. Compo-
nent Video Input,” and then press
[Enter].
4 Use the Up and Down [ ]/[ ]
buttons to select an input selec-
tor, and use the Left and Right
[
]/[ ] buttons to select:
IN1: Select if the video compo-
nent is connected to COM-
PONENT VIDEO IN 1.
IN2: Select if the video compo-
nent is connected to COM-
PONENT VIDEO IN 2.
- - - - -: Select if you’re not using the
COMPONENT VIDEO IN1
or IN2.
5 Press the [Setup] button.
Setup closes.
Digital Input Setup
Input selector Audio input
DVD COAX1
VCR/DVR - - - - -
CBL/SAT COAX2
Game/TV OPT1
AUX - - - - -
Tape - - - - -
CD OPT2
1 Press the [Receiver] button, fol-
lowed by the [Setup] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.