Integra DTR-5.9 - Manual (Page 15)

15
Connecting Your Speakers —Continued
Speaker Configuration
For 7.1-channel surround-sound playback, you need
seven speakers and a powered subwoofer.
The following table shows which channels you should
use based on the number of speakers you have.
* If you’re using only one surround back speaker, connect it to the
SURR BACK L terminals.
No matter how many speakers you use, a powered sub-
woofer is recommended for a powerful and solid bass.
To get the best from your surround-sound system, you
must set the speaker settings. You can do this automati-
cally (see page 39) or manually (see page 82).
Using Dipole Speakers
You can use dipole speakers for the surround left and
right and surround back left and right speakers. Dipole
speakers output the same sound in two directions.
Dipole speakers typically have an arrow printed on them to
indicate how they should be positioned. The surround left
and right dipole speakers should be positioned so that their
arrows point toward your TV or screen, while the surround
back left and right dipolar speakers should be positioned
so that their arrows point toward each other, as shown.
Number of speakers: 2 3 4 5 6 7
Front left ✓ ✓ ✓ ✓ ✓ ✓
Front right ✓ ✓ ✓ ✓ ✓ ✓
Center ✓ ✓ ✓ ✓
Surround left ✓ ✓ ✓ ✓
Surround right ✓ ✓ ✓ ✓
Surround back* ✓
Surround back left ✓
Surround back right ✓
2
1
3 4 2
1
3 4
5 6
7 8
5
7 8
6
TV/screen TV/screen
1. Subwoofer
2. Front left speaker
3. Center speaker
4. Front right speaker
5. Surround left speaker 6. Surround right speaker
7. Surround back left
speaker
8. Surround back right
speaker
Dipole speakers Normal speakers