Insignia NS-WBRDVD3 - Manual (Page 29)

25
Wireless 3D Connected Blu-ray Disc Player
www.insigniaproducts.com
Turning InLink on or off
This option is used to allow the TV remote control
to control certain functions of the Blu-ray
player; and for the Blu-ray player to control certain
functions of the TV. InLink control is only
available when you are using an HDMI connection
to your TV.
To turn InLink on or off:
1 Turn on your player.
If no disc is in the disc tray, the HOME menu is
displayed.
Or
If a disc is in the tray, press HOME. The
HOME menu is displayed.
2 Press S T W or X on the remote control to
highlight SETTINGS, then press ENTER. The
SETTINGS menu opens.
3 Press S or T to highlight System.
4 Press ENTER.
5 Press S or T to highlight InLink, then press
ENTER.
6 Press S or T to highlight On or Off, then press
ENTER.
Upgrading your player’s firmware
You can upgrade your player’s firmware by:
• Connecting your player to the Internet and
letting your player tell you when a firmware
upgrade is available
• Downloading a firmware upgrade to a disc or
USB flash drive, then installing the firmware
upgrade from the disc or flash drive
• Manually installing an upgrade directly from
the Internet.
To let your player tell you when a firware
upgrade is available:
1 Connect your player to the Internet. When your
player is connected to the Internet, it
automatically detects available firmware
upgrads and displays a message on the screen.
2 Follow the on-screen instructions to install the
firmware upgrade.
To upgrade your player’s firmware from a disc or
flash drive:
1 Insert the disc or flash drive into a computer.
2 Go to www.insigniaproducts.com, type
“NS-WBRDVD3” in the search box, then press
ENTER.
3 Click the CURRENT Firmware link, then save the
firware update to the disc or flash drive.
4 Insert the disc or flash drive into your player.
Your player automatically detects the upgrade
software and installs it on your player.
5 Follow the on-screen instructions to complete
the firmware upgrade. A message tells your
when the upgrade is complete.
6 Press ENTER.
To upgrade your player’s firmware directly from
the Internet:
1 Turn on your player.
If no disc is in the disc tray, the HOME menu is
displayed.
Or
If a disc is in the tray, press HOME. The
HOME menu is displayed.
2 Press S T W or X on the remote control to
highlight SETTINGS, then press ENTER. The
SETTINGS menu opens.
Note
Not all TVs are compatible with your Blu-ray player.
Screen Saver
Disc Auto Playback
InLink
Firmware Update
Load Defaults
Deactivate Online Serv...
5 Minutes
On
Off
More...
More...
Display
Audio
Language
Network
System
Security
HOME Exit RETURN
Use cursor keys to highlight menu and
ENTER key to select