IBM INFOPRINT 1116 - Manual (Page 89)

Argecy Computer Corporation 248-324-1800
85
USB NPA Mode is set to Auto, the factory default.
When USB NPA Mode is set to On, your computer can send print jobs to
the printer and query printer status information simultaneously.
• Press the operator panel button with a brief button press to scroll
through the settings (Off, On, Auto). Press the operator panel button
with a long button press to select and save the Off or On setting. As the
setting is saved, all operator panel lights remain on for approximately 2
seconds
• Press the operator panel button with a double button press to scroll
back to the first menu item, PPDS Activated.
Turn off the printer to exit the advanced troubleshooting mode.
For standard and network models, PPDS Activated is set to Off, the
factory default.
Turn PPDS Activated on when working in applications using the PPDS
datastream:
• Press the operator panel button with a brief button press to scroll
through the settings (On, Off). Press the operator panel button with a
long button press to select and save the On setting. As the setting is
saved, all operator panel lights remain on for approximately 2 seconds.
• Press the operator panel button with a double button press to scroll to
the next menu item, Auto CRLF/LFCR.
Turn off the printer to exit the advanced troubleshooting mode.
This light sequence in
advanced troubleshooting
mode:
Corresponds to this setting: