IBM INFOPRINT 1116 - Manual (Page 66)

Argecy Computer Corporation 248-324-1800
62
What this light sequence means:
The printer flash memory is full.
What you can do:
• Print data without saving it in flash memory by
pushing the operator panel button with a brief button
press.
• Cancel the job. Push the operator panel button until
all the lights come on to reset the printer.
What this light sequence means:
The printer flash memory is full. In addition, the toner in the
print cartridge is getting low.
What you can do:
• Print data without saving it in flash memory by
pushing the operator panel button with a brief button
press.
• Remove the print cartridge and shake it to extend
the life of the cartridge.
• Replace the print cartridge .
• Cancel the job. Push the operator panel button until
all the lights come on to reset the printer.
Note: The Toner Low light does not come on if
the standard 1,500-page print cartridge
is installed in the entry model.