IBM INFOPRINT 1116 - Manual (Page 110)

Argecy Computer Corporation 248-324-1800
106
In the following illustration, each binary number corresponds to an error light sequence:
Error conditions
What shows on the four
indicator lights
Description Cause and solution
binary 12 (for 0.25 sec),
binary 3 (for 0.25 sec),
repeat continuously.
Serious failure.
The print server is unable
to recover.
Unrecoverable software error. Call the place where
you bought your printer.
binary 15 (for 0.25 sec),
binary x (for 0.25 sec),
repeat continuously.
where x could be 0, 1, 2, 3,
4, 5, 6, 7, 8, or 9
POST error Power-on self test error. During start-up, a hardware
failure was detected on the print server.
• Press the Menu and Test buttons simultaneously
to reset the print server.
• If the problem reoccurs, call the place where you
bought your printer.
binary 9 (for 1 sec)
binary 6 (for 1 sec)
repeat continuously.
The print server is not
connected to the
network. Print a network setup page and look under Status. If
it shows the printer server is not connected:
• Make sure the Ethernet cable is firmly plugged in.
• Try another wall outlet.
Test
Menu