IBM INFOPRINT 1116 - Manual (Page 73)

Argecy Computer Corporation 248-324-1800
69
What you can do:
• Check that the Ethernet cable is still plugged into the
printer.
• Print a test page to verify that the parallel buffer
setting or USB buffer setting is disabled (see
Parallel port enabled or USB port enabled in
Advanced Troubleshooting).
What this light sequence means when you press the
operator panel button with a double-button press from
the
special function menu :
The printer has a service error and printing has stopped.
What you can do:
• Turn the printer off and back on. If the lights are still
blinking, contact the place where you bought your
printer.