Intel AXXSW1GB - Manual (Page 58)

Intel® Gigabit Ethernet Switch AXXSW1GB User Guide 45
To configure Trunk Group Failover:
1. Click Layer 2 > Interface > Trunk Group Fail Over. The Trunk Group Fail Over
Page opens:
Figure 31. Trunk Group Fail Over Page
The Trunk Group Fail Over Page contains the following fields:
• Group Failover Status — Enables the Trunk Group Failover feature on the device.
The possible field values are:
— Enable — Enables Trunk Group Failover on the device.
— Disable — Disables Trunk Group Failover on the device.
• Group — Displays the Trunk Group number.
• Group State — Indicates the Trunk Group state. The possible field values are:
— Up — Indicates the group state is active.
— Down — Indicates the group state is inactive.
• Port — Displays the port added to the specific Trunk Group.
• Type — Displays the port type. The possible field values are:
— Uplink — Ports that connect the switch and external network to the associated
internal ports and server NIC.
— Associated — Ports that are associated with an Uplink port.
• Port State — Indicates the port state within the Trunk Group. The possible field
values are:
— Up — Indicates the port is in the Up state.
— Down — Indicates the port is in the Down state.