Intel AXXSW1GB - Manual (Page 119)

106 Intel® Gigabit Ethernet Switch AXXSW1GB User Guide
Configuring CoS General Parameters
The CoS Global Settings Page contains information for enabling QoS globally and on
specific interfaces. After QoS has been configured, the original device QoS default
settings can be reassigned to the interface in the CoS Global Settings Page.
To enable QoS:
1. Click QoS > General > CoS. The CoS Global Settings Page opens:
Figure 75. CoS Global Settings Page
The CoS Global Settings Page contains the following:
• QoS Mode — Determines whether QoS is enabled on the device. The possible values
are:
— Disable — Disables QoS on the device.
— Basic — Enables CoS Basic mode on the device.
— Advanced — Enables Advanced CoS mode on the device.
• Ports — Displays the ports on which CoS is enabled.
• LAGs — Displays the LAGs on which CoS is enabled.
• Interface — Displays the interface for which the global QoS parameters are defined.
— Port — Selects the port for which the global QoS parameters are defined.
— LAG — Selects the LAG for which the global QoS parameters are defined.
• Default CoS — Determines the default CoS value for incoming packets for which a
VLAN priority is not defined. The possible field values are 0-7. The default CoS is 0.