IBM 19 - Manual (Page 73)

5. Load the paper printing-side up in the cassette, top end first
for letterhead or preprinted media. (Printing on the wrong side
may reduce print quality.) Make sure the paper lies flat and
does not exceed the upper-limit mark on the cassette for foil
(transparencies) or paper (fig. 2.32). Overloading the cassette
can cause a jam.
6. Adjust the paper guides on each side and on the trailing edge
of the media so that they rest lightly against the media without
causing it to buckle.
Paper
Foil
Paper Foil
Fig. 2.32 Load the Paper
Chapter 2
I n i t i a l P r i n t e r S e t u p 2 - 4 1
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500