Asba seat – Invacare Wheelchair Pronto M61 User Manual

Page 44

SECTION 7—SEAT

ASBA Seat

NOTE: For this procedure, refer to FIGURE 7.6.

NOTE: This procedure is for Adjustable Seat Back Angle (ASBA) seats only.

1. Remove the seat cushion from the seat pan.

2. Move the flip back armrests out of the way. Refer to Positioning/Adjusting Flip Back

Armrests on page 50.

3. Remove the two mounting screws, quick release pin tabs, spacers, and locknuts that

secure the seat pan and seat positioning straps to the seat frame.

4. Remove the two halves of the seat positioning strap from the rear seat frame.

5. Reposition the two new seat positioning strap halves underneath seat rails.

6. Reinstall the two mounting screws, quick release pin tabs, spacers, and locknuts that

secure the seat pan and seat positioning straps to the seat frame and torque to 75 inch‐
pounds.

7. Reinstall the seat cushion onto the seat pan.

FIGURE 7.6 Replacing the Seat Positioning St rap - ASBA Seat

Mounting

Screw

Seat Positioning Strap

Quick Release Pin Tab

Seat Rail

Locknut

Spacer

Seat Pan

Front of Seat

Frame

Rear of Seat

Frame