Replacing the seat positioning strap – Invacare Wheelchair Pronto M61 User Manual

Page 43

SECTION 7—SEAT

Replacing the Seat Positioning Strap

ƽ WARNING

ALWAYS wear your seat positioning strap.
The seat positioning strap is a positioning belt only. It is not designed for use as a

safety device withstanding high stress loads such as auto or aircraft safety belts. If

signs of wear appear, belt MUST be replaced IMMEDIATELY.

Van Seat

NOTE: For this procedure, refer to FIGURE 7.5.

1. Remove the two mounting screws that secure the seat positioning straps to the seat

frame.

2. Remove the two halves of the seat positioning strap from the rear seat frame.

3. Reposition the two new seat positioning strap halves underneath seat rails.

4. Reinstall the two mounting screws that secure the seat positioning straps to the seat

frame. Securely tighten.

FIGURE 7.5 Replacing the Seat Positioning Strap - Van Seat

Seat Positioning

Strap

Seat Positioning

Strap

Mounting Screws

Seat

Seat Lever

NOTE: Office style van seat is shown. Standard van seat adjusts the same way.