Invacare Wheelchair Pronto M61 User Manual

Page 37

SECTION 6—ARMS

Adjusting Angle

NOTE: For this procedure, refer to FIGURE 6.3.

ƽ WARNING

Pinch point may occur when adjusting

the arm angle position.

1. Lift up the armrest.
2. Loosen the jam nut.
3. Adjust the socket screw up or down to

the desired arm angle position.

4. Tighten the jam nut.
5. To determine the same angle for the

opposite armrest, count the exposed
threads after the jam nut has been
tightened.

6. Repeat STEPS 1‐5 for opposite armrest,

if necessary.

FIGURE 6.3 Adjusting Angle

Adjusting Height

NOTE: For this procedure, refer to FIGURE 6.4.

1. Remove the socket screw that secures the armrest to the seat frame assembly.

2. Adjust the armrest to one of four positions.

3. Reinstall the socket screw that secures the armrest to the seat frame assembly and

tighten securely.

FIGURE 6.4 Adjusting Height

Arm Pad

Adjustment

Screw

Jam Nut

Count Exposed Thread

Pinch Point

Armrest

Height

Adjustment

Holes

Arm Frame

Assembly

Lock Knob