4 command control via the network – InFocus IN5122 User Manual

Page 85

7.4 Command Control via the Network

You can configure and control the projector via the network using RS-232C

commands.

Communication Port
The following two ports are assigned for command control.

Command Control Settings (&50)

4) Click [Apply] to save the settings.

Configure the following items from a web browser when command control is used.

Example

: If the IP address of the projector is set to 192.168.1.10:

1) Enter “http://192.168.1.10/” into the address bar of the web browser.

2) Enter your user name and password, and then click [OK].

3) Click [Port Settings] on the main menu.

7. Other Features

TCP #23 (Network Control Port1 (Port: 23))

TCP #9715 (Network Control Port2 (Port: 9715))

• Command control is available only via the specified port above.

NOTE