InFocus IN5122 - Manual (Page 42)

40
2.1.3 Switching the display mode
The “LiveViewer” has both a Single PC mode and Multi PC mode. The modes can
be switched using the main menu.
1) Click the button on the main menu.
The buttons below are displayed.
2) Select between buttons  to , and click it.

Single PC mode : Your image will be displayed on full screen.

- Multi PC modes : Your image will be displayed on the quadrant identified
on the button.
3) The projector screen will switch to the mode selected above, and your
computer image will display your image on the screen.
4) The icon on the main menu will be replaced by the icon you selected.
     y
The display mode can also be set by using the MULTI PC MODE in the
PRESENTATION option in the NETWORK menu. The last setting made will take
effect regardless of the setting method.
(Refer to
& NETWORK menu in the User’s Manual
for information on this
projector feature.)
• Image transmission will be stopped, when you are already in the
Single PC mode and you click the Single mode button again; or when you click
one of the Multi PC mode buttons, when you are already in Multi PC mode and
you click one of the Multi PC mode buttons again.
• If the Multi PC mode is selected, the projector screen is automatically divided
into 4 quadrants.
• If the Presenter mode is set on in the computer whose image is currently
on screen in the Single PC mode, the button cannot be clicked on other
computers.
• If you select a Multi PC mode quadrant button which is displaying images from
another computer, the image transmission from that computer will be stopped.
NOTE
2. Network Presentation
2.1 Using the “LiveViewer” (continued)
y:
Status Display