InFocus IN5122 - Manual (Page 10)

8
1.3 Process to connect the network
Before connecting your computer and projector to a network, the LAN port must
be selected as the projector's input source. (&"Operating" section in the User’s
Manual
) Otherwise a connection cannot be established.
1.3.1 Process overview
An overview of the process to connect your computer and the projector via a
network is shown below.
The “LiveViewer” allows you to skip some of the steps below to establish a
network connection quickly and easily.
1. Connection to the network

Selecting the network connection mode
- Wireless LAN
- Wired LAN
- My Connection

Selecting the network connection method
- Enter PassCode
- Configure Manually
- Select From List

Manual configuration
- Profile
- History
- Configure Network Settings Manually

Configuring the network settings manually

Confirming the connection to your destination
• Wireless LAN can be selected only when an access point to convert
wireless LAN to wired LAN exists between your computer and the projector.
• Up to 30 computers can be simultaneously connected to the projector through
a network.
NOTE
If My Connection is
selected
If Enter PassCode or
Select From List is
selected
If Profile or History is
selected