InFocus IN5122 - Manual (Page 83)

81
• In power saving mode, the POWER indicator will flash green for
approx. 3 seconds when at least 1 “Power ON” schedule is saved.
• When the schedule feature is used, the power cord must be connected to the
projector and the outlet. The schedule feature does not work when the breaker
in a room is tripped. The power indicator will light orange or green when the
projector is receiving AC power.
NOTE
Schedule Settings (&55)
7.3 Event Scheduling(Continued)
Schedule settings can be configured from a web browser.
Example
: If the IP address of the projector is set to 192.168.1.10:
1) Enter “http://192.168.1.10/” into the address bar of the web browser.
2) Enter your user name and password, and then click [OK].
3) Click [Schedule Settings] on the main menu and select the required schedule
item. For example, if you want to perform the command every Sunday, please
select [Sunday].
4) Click [Enable] to enable scheduling.
5) Enter the date (month/day) for specific date scheduling.
6) Click [Apply] to save the settings.
7) After configuring the time, command and parameters, click [Register] to add
the new event.
8) Click [Delete] when you want to delete a schedule.
There are three types of scheduling.
1) Daily: Performs the specified operation at a specified time every day.
2) Sunday ~ Saturday: Performs the specified operation at the specified time on a
specified day of the week.
3) Specific date: Performs the specified operation on the specified date and time.
7. Other Features