InFocus IN5122 - Manual (Page 56)

54
The Alert Items are shown below.
Item Description
Alarm Time
Configures the alert time.
(Only Lamp Time Alarm and Filter Time Alarm.)
SNMP Trap
Click [Enable] to enable SNMP Trap alerts.
Send Mail
Click [Enable] to enable e-mail alerts.
(Except Cold Start and Authentication Failure.)
Mail Subject
Configures the email subject line to be sent.
Up to 100 alphanumeric characters may be used.
(Except Cold Start and Authentication Failure.)
Mail Text
Configures the text of the e-mail to be sent.
The text length can be up to 1024 alphanumeric characters,
but if you are using some of special characters below the
length may be shorter.
Special characters " ' : and , % \ and space
(Except Cold Start and Authentication Failure.)
Click [Apply] to save the settings.
• The Filter Error trigger e-mail depends on the FILTER MESSAGE
settings in the OPTION>SERVICE submenu which defines the period until
the filter message is displayed on the projector screen. An e-mail will be sent
when the filter usage time exceeds the set time limit. No e-mail will be sent if
the FILTER MESSAGE is set to DISABLE. (&OPTION menu in the User’s
Manual
)
• Lamp Time Alarm is defined as the threshold for a lamp timer e-mail
notification (reminder). When the lamp hours exceed this threshold (as
configured in the web page), the e-mail will be sent out.
• Filter Time Alarm is defined as the threshold for a filter timer e-mail
notification (reminder). When the filter hours exceed this threshold (as
configured in the web page), the e-mail will be sent out.
NOTE
3.6 Alert Settings (Continued)
3. Web Control