InFocus IN5122 - Manual (Page 29)

27
Wired LAN
IP address : 192.168.1.10 (example)
Subnet mask : 255.255.255.0 (example)
2) Click [Connect].
3) The network connection will be established.
Go to 1.8 Confirming the connection to your destination. (&30)
1) Enter the following information for the
projector. *1
Consult your network administrator. Log into Windows as an Administrator.
After that, go back to 1.3.2 Starting the “LiveViewer”. (&9)
[Troubleshooting]
n A network connection could not be established.
Windows prevented network configuration
changes.
You may log into Windows as a User.
Click [OK] and the “LiveViewer” main menu
will be displayed even though the network
is not established. Click on the main
menu and go back to item 1.5 Selecting the
network connection method
. (&14)
*1
To find out the projector's network settings, refer to the NOTE. (&22)
1.7 Configuring the network settings manually (continued)
1. Connection to the network