InFocus IN5122 User Manual
Page 44
42
Presenter Mode
In the Single PC mode, the projector can be used to display a single
computer image and block other computer images from being displayed
when the Presenter mode is selected in “LiveViewer”.
While making your presentation, you don’t need to worry about your
displayed presentation unexpectedly switching to another computer image.
The Presenter mode can be set in the "LiveViewer" Option menu.
If you want to turn it on, put a checkmark in the checkbox.
• If the Multi PC mode is selected, the Presenter mode setting is
disabled.
• When switching from Multi PC mode to Single PC mode, the computer's
Presenter mode setting is enabled.
• The Presenter Mode is enabled by factory default.
• In addition to controlling Presenter Mode using the software menu
on the computer, you can cancel Presenter Mode using the projector's
OSD menu option, QUIT PRESENTER MODE EXECUTE, in the
NETWORK>PRESENTATION menu.
NOTE
Display User Name
A “User Name” can be input using up to 20 alphanumeric characters.
The user name can be displayed on the projector screen, so that you know
whose image is currently on the screen.
(Refer to
&
NETWORK menu in the User’s Manual
)
If the checkbox is not marked, the information is not sent to the projector.
2. Network Presentation
2.1 Using the “LiveViewer” (continued)