Insignia NS-LBD32X-10A - Manual (Page 20)

16
NS-LBD32X-10A Insignia 32" LCD TV/Blu-ray DVD Combo, 1080p
www.insigniaproducts.com
4 Press TV MENU. The Main Menu opens.
5 Press or to select a menu, then press or
ENTER. The menu opens.
6 Press or to select a setting. If the setting has
a separate menu, >> appears next to the setting.
press
or ENTER. The menu opens.
7 Press or to adjust the setting.
8 Press TV MENU to return to the previous menu,
or press EXIT to close the menu.
Switching between TV and Blu-ray modes
To switch between TV and Blu-ray modes:
• Press TV for TV mode.
• Press BD for Blu-ray mode.
Selecting a channel
To select a channel:
• Press CH
or CH to go to the next or
previous channel in the channel list and skip
channels that are not in the list. For more
information, see “Automatically scanning for
channels” on page 23.
• Press the number buttons for the channel. For
example:
• To select channel 2, press 2.
• To select channel 12, press 1 then press 2.
• To select channel 120, press 1, 2, then press 0.
• To select the last channel viewed, press RECALL.
• To select a digital sub-channel, press the number
buttons for the main channel, press , then press
the number for the sub-channel. For example, to
select sub-channel 001 of digital channel 015,
press 0, 1, 5, ,
0, 0, 1.
Adjusting the volume
To adjust the volume:
1 Press VOL+ to increase the volume.
2 Press VOL– to decrease the volume.
3 Press MUTE to turn off the sound. Press MUTE,
VOL+, or VOL– to restore the sound.
Displaying additional information
To display additional information:
• Press INFO. to display information about the
program on the screen.
• Digital information includes channel number,
channel label (if preset), broadcast program
name, V-chip rating, signal type, sleep timer,
audio language, program guide, picture size,
and resolution.
• Analog information includes channel number,
channel label (if preset), V-chip rating, signal
type, sleep timer, picture size, audio
information (Stereo, SAP, or Mono), and
resolution.
• Press INFO. again to clear the display, or wait a
few seconds and your TV/Blu-ray combo returns
to normal operation automatically.
Note
• If you select a channel with audio content only,
“Audio only” is displayed on the screen.
• If you select a channel with a weak digital signal,
“Digital channel signal strength is low” is
displayed on the screen.
• The same program may be available on either
an analog channel or a digital channel. You can
choose to watch either format.
• If you select a channel to which you have not
subscribed, “Digital channel is encrypted” is
displayed on the screen.
• If you select channel with no broadcast signal,
the sound is muted automatically.
• It may take a few seconds for a digital channel
picture to appear on the screen after your
select it.
Air Cable
VHF 2-13
UHF
14-69 STD/HRC/IRC
14-36 (A) (W)
37-59(AA) (WW)
60-85(AAA) (ZZZ)
86-94(86) (94)
95-99(A-5) (A-1)
100-135(100) (135)
01(4A)