Insignia NS-LBD32X-10A - Manual (Page 12)

8
NS-LBD32X-10A Insignia 32" LCD TV/Blu-ray DVD Combo, 1080p
www.insigniaproducts.com
Using the remote control
Installing remote control batteries
To install remote control batteries:
1 Remove the battery compartment cover.
2 Insert two AA batteries (included) into the
battery compartment. Make sure that the +
and – symbols on the batteries match the +
and – symbols in the battery compartment.
3 Replace the battery compartment cover.
Aiming the remote control
To use the remote control:
Point the remote control directly at your TV, within
a 60° angle horizontally (30° to either side) and
within 30° vertically of the remote control sensor on
the front of your TV, and within 15 feet (4.6 meters)
of your TV.
STEP
Press to advance one frame at a time on a Blu-ray Disc
or DVD. Press PLAY to resume normal playback.
SEARCH
Press to fast-forward on a Blu-ray Disc, DVD, or CD.
SKIP
Press to go to the next chapter on a Blu-ray Disc or DVD
or to the next track on a CD.
STOP
Press to stop disc playback.
Cautions
• Make sure that you match the + and – symbols
on the batteries with the symbols in the battery
compartment.
• Do not mix different types of batteries or old
and new batteries.
• If you do not intend to use the remote control
for a extended period of time, remove the
batteries to prevent leakage.
• Do not try to recharge non-rechargable
batteries. They may overheat and rupture.
# Button Description
39
40
41
42
Caution
Do not expose the remote control to liquids, direct
sunlight, or shock.
Notes
• Objects between the remote control and the
remote control sensor may block the remote
control signal.
• The range of the remote control may be
diminished if direct sunlight or other strong
light is shining at the remote control sensor. In
this case, change the angle of the lighting, move
your TV, or operate the remote control closer to
the remote control sensor.
15 feet
(4.6 meters)