Intel AIMB-253 - Manual (Page 44)

AIMB-253 User Manual 34
If you select [Manual], related information is asked to be entered to the
following items. Enter the information directly from the keyboard. This
information should be provided in the documentation from your hard disk
vendor or the system manufacturer.
Halt On
The setting determines whether the system will stop if an error is detected
at boot. When the system stops for the errors preset, it will halt on for 15
seconds and then automatically resume its operation. Available options
are:
Base/Extended/Total Memory
The three items show the memory status of the system. (Read-only)
Access Mode
The settings are CHS, LBA, Large, Auto.
Capacity
The formatted size of the storage device.
Cylinder
Number of cylinders.
Head
Number of heads.
Precomp
Write precompensation.
Landing Zone
Cylinder location of the landing zone.
Sector
Number of sectors.
[All Errors]
The system stops when any error is detected.
[No Errors]
The system doesn’t stop for any detected error.
[All, But Keyboard]
The system doesn’t stop for a keyboard error.