Clear transmission buffer, Transmit buffer, Clear transmission buffer -32 transmit buffer -32 – Motorola LS4208 User Manual
Page 180
12 - 32 Symbol LS4208 Product Reference Guide
Clear Transmission Buffer
To clear the transmission buffer, scan the Clear Buffer bar code below, which contains only a start character, a
dash (minus), and a stop character.
•
The scanner issues a short high/low/high beep.
•
The scanner erases the transmission buffer.
•
No transmission occurs.
Transmit Buffer
There are two methods to transmit the Code 39 buffer.
1.
Scan the Transmit Buffer bar code below which contains only a start character, a plus (+), and a stop
character.
•
The scanner transmits and clears the buffer.
•
The scanner issues a low/high beep.
2.
Scan a Code 39 bar code with a leading character other than a space.
•
The scanner appends new decode data to buffered data.
•
The scanner transmits and clears the buffer.
•
The scanner signals that the buffer was transmitted with a low/high beep.
•
Scanner transmits and clears the buffer.
Clear Buffer
NOTE
Because the Clear Buffer contains only the dash (minus) character, set the Code 39 length
to include length 1 before scanning this bar code.
Transmit Buffer
NOTE
Because the Transmit Buffer contains only a plus (+) character, set the Code 39 length to
include length 1 before scanning this bar code.