Motorola HT820 - Manual

HT820
Bluetooth®
Stereo Headphones
Start Here > > >
Before using this product, read the Important Safety and
Legal Information pamphlet and follow its instructions.
USE THE HT820
Ready to make it work?
- Charge your Headphones for 2 Hours (CHARGE)
- Pair headphones & audio device (PAIR)
- Pair phone & headphones (back side of this guide)
- Listen to music and take calls!
Bluetooth
Enabled
Phone
HT820
Any Bluetooth
Enabled Audio
Device*
o
*The Bluetooth Enabled Audio Device must be A2DP compatible
You can use your HT820 headphones
simultaneously with a Bluetooth A2DP
enabled audio device and your Bluetooth cell
phones!
Listen to music, hear a beep, and transfer to
take the call on the headphones. Hang up the
call with a push of a button and your music
automically continues playing.
CHARGE
Your Headphones' Battery
Note: Headphones do not function while charging.
Before using your HT820 for the first time,
charge the headphones for 2 hours:
Plug the Motorola charger into the
headphones. The indicator light turns on
when the battery is charging. When the
headphones' battery is fully charged, the
indicator light turns off.
Disconnect the charger.
1
2
Charger
Insert Charger
Here
Music Button
Indicator
Light
(Right Side)
1
You can also use a Motorola Original™
Vehicle Power Adapter to charge your
headphones while in your vehicle.
A fully charged battery provides
approximately: 14 hrs of music listening, 17
hrs of talk time, or 500 hrs of standby time. )
PAIR
Before you can use your headphones with a
Bluetooth enabled product, you must pair it
with that product. To pair:
1
Call Button with
Indicator Light
(Left Side)
Next, put your Bluetooth Enabled audio
device in pairing mode so the devices can
"talk" to each other.
For details about putting Bluetooth
Enabled devices in pairing mode, refer to
the device's User's Guide for directions.
2
Note: To pair the headphones with your phone, see "Pair
with your Phone," on the reverse side of this guide.
Make sure your headphones are turned off
(see Turning On and Off ) and press and
hold the left side Call
m
button for 6
seconds until the indicator light turns on and
remains steadily lit.
2