Motorola LS4208 - Manual (Page 147)

Chapter 11 123Scan
Introduction
123Scan is a Windows
®
-based utility that programs the scanner with all parameters including ADF rules. An ADF
rule modifies bar code data before it is sent to the host to ensure compatibility between bar coded data and the
host application. Scanners can be programmed via PC download or by scanning a sheet of bar codes generated
by the utility. Scanner programming is saved in a file for electronic distribution. The 123Scan program includes a
help file.
Communication with 123Scan
To communicate with the 123Scan program which runs on a host computer running a Windows operating system,
use an RS-232 cable to connect the scanner to the host computer (see Connecting an RS-232 Interface on page
6-2).
123Scan requirements:
• Host computer with Windows 98, Windows NT, Windows 2000, or Windows XP
• Scanner
• RS-232 cable.
123Scan Parameter
To communicate with the 123Scan program, load 123Scan, included in the documentation CD-ROM, onto the host
computer, and scan the bar code below. Refer to 123Scan instructions for programming the scanner.
Scan the bar code below to enable the 123Scan interface on the scanner.
123Scan Configuration