Motorola LS4208 - Manual (Page 157)

Symbologies 12 - 9
Enable/Disable Bookland EAN
To enable or disable Bookland EAN, scan the appropriate bar code below.
Decode UPC/EAN/JAN Supplementals
Supplementals are additionally appended characters (2 or 5) according to specific code format conventions (e.g.,
UPC A+2, UPC E+2, EAN 8+2). The following options are available:
• If you select Ignore UPC/EAN with Supplementals, and the scanner is presented with a UPC/EAN plus
supplemental symbol, the scanner decodes UPC/EAN and ignores the supplemental characters.
• If you select Decode UPC/EAN with Supplementals, the scanner only decodes UPC/EAN symbols with
supplemental characters, and ignores symbols without supplementals.
• If you select Autodiscriminate UPC/EAN Supplementals, the scanner decodes UPC/EAN symbols with
supplemental characters immediately. If the symbol does not have a supplemental, the scanner must decode
the bar code the number of times set via
UPC/EAN/JAN Supplemental Redundancy on page 12-14 before
transmitting its data to confirm that there is no supplemental.
• If you select one of the following Supplemental Mode options, the scanner immediately transmits EAN-13
bar codes starting with that prefix that have supplemental characters. If the symbol does not have a
supplemental, the scanner must decode the bar code the number of times set via
UPC/EAN/JAN
Supplemental Redundancy on page 12-14 before transmitting its data to confirm that there is no
supplemental. The scanner transmits UPC/EAN bar codes that do not have that prefix immediately.
• Enable 378/379 Supplemental Mode
• Enable 978/979 Supplemental Mode
Enable Bookland EAN
*
Disable Bookland EAN
NOTE
If you enable Bookland EAN, select a Bookland ISBN Format on page 12-21. Also select
either Decode UPC/EAN Supplementals, Autodiscriminate UPC/EAN Supplementals, or Enable
978/979 Supplemental Mode in
Decode UPC/EAN/JAN Supplementals .
NOTE
If you select 978/979 Supplemental Mode and are scanning Bookland EAN bar codes, see
Enable/Disable Bookland EAN to enable Bookland EAN, and select a format using Bookland ISBN
Format on page 12-21.