Madrigal Imaging MP-8 - Manual (Page 89)

the current date per the format displayed in item 4 (month/day/year,
day/month/ year or year/month/day). When the proper date has been
entered and is displayed, press
to accept the changes and leave date
editing mode.
Note: On entry of the last digit, you automatically leave date editing mode.
Time Format
Press from the Set Clock menu to change the time display format. The
format may be 12 hours (12h) or 24 hours (24h). All references to time by
the projector will use the format displayed (this includes the time displayed
in item 1.)
Date Format
Press from the Set Clock menu to change the date display format.
The format may be month/day/year (MM/DD/YY), day/month/year
(DD/MM/YY) or year/month/day (YY/MM/DD). All references to
date by the projector will use the format displayed (this includes the date
displayed in item 2).
Programmable Events
Press from the Clock/Events menu to display the Programmable Events
feature box. The Programmable Events feature box allows you to program a
list of up to twelve events to occur at specified times and intervals. For exam-
ple, you can program the projector so that at the same time each day, standby
mode is turned off and Source 01 is displayed. See the example below.
Each line contains a type of event, a frequency of occurrence (interval), a
start time and an enable/disable flag.
2
2 7 UTIL
4
3
ENTER
OPERATION
3.47