Madrigal Imaging MP-8 - Manual (Page 28)

Step 16 ➤ Press or to adjust for best electrical focus at the center of the picture.
Step 17 ➤ On the MP-9, loosen the three bolts labeled
“B”. One is located on the top plate. The
other two are below the red lens.
On the MP-8, loosen the four bolts
labeled “A”.
Loosen the two bolts labeled “B”.
Step 18
➤
A red and green crosshatch is displayed. Move
the red lens so that the left and right edges of the
red crosshatch match the green.
Step 19
➤
On the MP-9, tighten the three bolts
labeled “B”.
On the MP-8, tighten the two
bolts labeled “B”.
Step 20 ➤ On the MP-9, loosen the three bolts
labeled “D”. One is located on the top plate.
The other two are below the blue lens.
On the MP-8, tighten the two bolts labeled “D”.
Step 21 ➤ A blue and green crosshatch is displayed. Move the
blue lens so that the left and right edges of the blue
crosshatch match the green.
Before After
R G B
B R G
R G B
R G B
B R G
R G B
Before After
B R G
R G B
INSTALLATION & SETUP
2.22