Usb parameter defaults, Usb parameter defaults -3 – Motorola LS1203 User Manual
Page 95
USB Interface
7 - 3
To set up the scanner:
1.
Attach the modular connector of the USB interface cable to the cable interface port on the scanner (see
Installing the Interface Cable on page 1-2
2.
Plug the series A connector in the USB host or hub, or plug the Plus Power connector in an available port of
the IBM SurePOS terminal.
3.
Select the USB device type by scanning the appropriate bar code from
4.
On first installation when using Windows, the software prompts to select or install the Human Interface Device
driver. To install this driver, provided by Windows, click Next through all the choices and click Finished on the
last choice. The scanner powers up during this installation.
5.
To modify any other parameter options, scan the appropriate bar codes in this chapter.
If problems occur with the system, see
.
USB Parameter Defaults
lists the defaults for USB host parameters. If any option needs to be changed, scan the appropriate bar
code(s) provided in the Parameter Descriptions section beginning on
NOTE
See
for all user preferences, hosts, symbologies, and miscellaneous
default parameters.
Table 7-1
USB Defaults
Parameter
Default
Page Number
USB Host Parameters
USB Device Type
HID Keyboard Emulation
USB Country Keyboard Types (Country Codes)
North American
USB Keystroke Delay
No Delay
USB CAPS Lock Override
Disable
USB Ignore Unknown Characters
Send
Emulate Keypad
Disable
USB FN1 Substitution
Disable
Function Key Mapping
Disable
Simulated Caps Lock
Disable
Convert Case
No Case Conversion