Unpacking, Setting up the scanner, Installing the interface cable – Motorola LS1203 User Manual
Page 18: Unpacking -2 setting up the scanner -2, Installing the interface cable -2
1 - 2
Symbol LS1203 Product Reference Guide
following international keyboards (for Windows
®
environment): North America, German, French, French
Canadian, Spanish, Italian, Swedish, UK English, Portuguese-Brazilian, and Japanese.
Unpacking
Remove the scanner from its packing and inspect it for damage. If the scanner was damaged in transit, call
Motorola Enterprise Mobility Support. See
for contact information. KEEP THE PACKING. It is the
approved shipping container and should be used if the equipment ever needs to be return for servicing.
Setting Up the Scanner
Installing the Interface Cable
To connect the interface cable:
1.
Insert the interface cable’s modular connector clip into the cable interface port on the bottom of the scanner
handle. (See
2.
Gently tug the cable to ensure the connector is properly secured.
3.
Connect the other end of the interface cable to the host. (See the specific host chapter for information on host
connections.)
Figure 1-2
Installing the Cable
Interface cable
modular connector
To host
Cable interface
port
Interface cable modular
connector clip
Interface cable
strain relief