beautypg.com

Interleaved 2 of 5 (itf), Enable/disable interleaved 2 of 5, Set lengths for interleaved 2 of 5 – Motorola LS1203 User Manual

Page 143: Interleaved 2 of 5 (itf) -31

background image

Symbologies 8 - 31

Interleaved 2 of 5 (ITF)

Enable/Disable Interleaved 2 of 5

To enable or disable Interleaved 2 of 5, scan the appropriate bar code below, and select an Interleaved 2 of 5
length from the following pages.

Set Lengths for Interleaved 2 of 5

The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Set lengths for I 2 of 5 to any length, one or two discrete lengths, or lengths within a specific
range.

One Discrete Length - Select this option to decode only I 2 of 5 symbols containing a selected length. Select
the length using the numeric bar codes in

Appendix D, Numeric Bar Codes

. For example, to decode only I 2

of 5 symbols with 14 characters, scan I 2 of 5 - One Discrete Length, then scan 1 followed by 4. To correct
an error or to change the selection, scan Cancel on

page D-3.

Two Discrete Lengths - Select this option to decode only I 2 of 5 symbols containing either of two
selected lengths. Select lengths using the numeric bar codes in

Appendix D, Numeric Bar Codes

. For

example, to decode only those I 2 of 5 symbols containing either 2 or 14 characters, select I 2 of 5 - Two
Discrete Lengths
, then scan 0, 2, 1, and then 4. To correct an error or to change the selection, scan
Cancel on

page D-3

.

Length Within Range - Select this option to decode an I 2 of 5 symbol with a specific length range.
Select lengths using numeric bar codes in

Appendix D, Numeric Bar Codes.

For example, to decode I 2 of

5 symbols containing between 4 and 12 characters, first scan I 2 of 5 - Length Within Range. Then scan 0,
4, 1, and 2 (single digit numbers must always be preceded by a leading zero). To correct an error or change
the selection, scan Cancel on

page D-3

.

Any Length - Scan this option to decode I 2 of 5 symbols containing any number of characters within the
scanner capability.

*

Enable Interleaved 2 of 5

Disable Interleaved 2 of 5

NOTE

Due to the construction of the I 2 of 5 symbology, it is possible for a scan line covering only a portion of
the code to be interpreted as a complete scan, yielding less data than is encoded in the bar code. To
prevent this, select specific lengths (I 2 of 5 - One Discrete Length - Two Discrete Lengths) for I 2 of 5
applications.