Motorola LS1203 - Manual (Page 84)

6 - 14 Symbol LS1203 Product Reference Guide
RTS Line State
This parameter sets the idle state of the Serial Host RTS line. Scan a bar code below to select Low RTS or High
RTS line state.
Beep on
When this parameter is enabled, the scanner issues a beep when a character is detected on the RS-232
serial line. is issued to gain a user's attention to an illegal entry or other important event.
*
Host: Low RTS
Host: High RTS
Beep On Character
(Enable)
*
Do Not Beep On Character
(Disable)