Assembling the hands free stand, Assembling the hands free stand -4 – Motorola LS1203 User Manual
Page 20
1 - 4
Symbol LS1203 Product Reference Guide
Assembling the Hands Free Stand
1.
Unscrew the wingnut from the bottom of the flexible neck.
2.
Fit the bottom of the neck piece into the opening on the top of the stand base. When positioned correctly, the
flat areas of the neck piece fit into place in the stand base opening.
3.
Tighten the wingnut underneath the base to secure the cup and neck piece to the base.
4.
Bend the neck to the desired position for scanning.
Figure 1-4
Hands Free Stand Parts
Set Auto-scan Mode
To enable hands free scanning, scan the Auto-scan Mode bar code on the back of the cup to set the scanner to
auto-scan mode.
Stand base
Wingnut
One piece scanner “cup”
with flexible neck.
Flat areas
Auto-scan bar code
(under cup)