Scan line width, Laser on time, Scan line width -6 laser on time -6 – Motorola LS1203 User Manual
Page 44
4 - 6
Symbol LS1203 Product Reference Guide
Scan Line Width
Scan a bar code below to set the scan line width.
Laser On Time
This parameter sets the maximum time that decode processing continues during a scan attempt. It is
programmable in 0.1 second increments from 0.5 to 9.9 seconds. The default Laser On Time is 3.0 seconds.
To set a Laser On Time, scan the bar code below. Next, scan two numeric bar codes in
that correspond to the desired on time. Single digit numbers must have a leading zero. For example, to set
an On Time of 0.5 seconds, scan the bar code below, then scan the “0” and “5” bar codes. If an error is made, or
the selection needs to be changed, scan Cancel on
.
NOTE
This feature applies to triggered mode only.
*
Full Width
Medium Width
Laser On Time