beautypg.com

User-programmable supplementals, Upc/ean/jan supplemental redundancy, T via – Motorola LS1203 User Manual

Page 123: Set via, Upc/ean/jan, Efix, User-programmable supplementals on, User-programmable

background image

Symbologies 8 - 11

User-Programmable Supplementals

If you selected a Supplemental User-Programmable option from

Decode UPC/EAN/JAN Supplementals on page

8-8

, select User-Programmable Supplemental 1 to set the 3-digit prefix. Then select the 3 digits using the

numeric bar codes beginning on

page D-1.

Select User-Programmable Supplemental 2 to set a second 3-digit

prefix. Then select the 3 digits using the numeric bar codes beginning on

page D-1.

UPC/EAN/JAN Supplemental Redundancy

With Autodiscriminate UPC/EAN/JAN Supplementals selected, this option adjusts the number of times a
symbol without supplementals is decoded before transmission. The range is from two to thirty times. Five or above
is recommended when decoding a mix of UPC/EAN symbols with and without supplementals, and the
autodiscriminate option is selected. The default is set at 7.

Scan the bar code below to set a decode redundancy value. Next, scan two numeric bar codes in

Appendix D,

Numeric Bar Codes

. Single digit numbers must have a leading zero. To correct an error or change a selection,

scan Cancel on

page D-3

.

User-Programmable Supplemental 1

User-Programmable Supplemental 2

UPC/EAN/JAN Supplemental Redundancy