MGE UPS Systems EX 7RT User Manual
Page 11
![background image](/manuals/123910/11/background.png)
Installation and User Manual
Figures
(continued)
figure description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page
3-1:
Initial Startup Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 — 1
3-2:
Control Panel with scroll up and down buttons. . . . . . . . . . . . . . . . . . . .3 — 2
3-3:
Configuration used to provide full redundancy (2N) to critical loads. . . .3 — 3
3-4:
Normal (double conversion) mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 — 5
3-5:
ECO mode display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 — 6
3-6:
Transfer, Threshold and End of backup time. . . . . . . . . . . . . . . . . . . . . .3 — 7
3-7:
Shutdown display, circuit breaker, and AC source switch. . . . . . . . . . . .3 — 8
4-1:
Disconnecting the power module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 — 4
4-2:
Reconnect the power module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 — 5
4-3:
Rear view of the battery module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 — 6
5-1:
Power supplied as a function of input voltage (left), and
Permissible UPS overloads as a function of time (right). . . . . . . . . . . . . .5— 1
Tables
table
description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page
1:
EX RT Model Descriptions and Contents . . . . . . . . . . . . . . . . . . . . . . . .1 — 2
2:
Optional Accessories (See section 1.5 for description) . . . . . . . . . . . . .1 — 3
3:
Power Module Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 — 4
4:
Battery Module Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 — 4
5:
Battery backup time chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 — 12
3-1:
Local Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 — 3
3-2:
Output features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 — 3
3-3:
ON/OFF features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 — 4
3-4:
Battery features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 — 4
4-1:
Network and Industrial Modes of Operation. . . . . . . . . . . . . . . . . . . . . . .4 — 1
4-2:
Troubleshooting not requiring MGE after-sales support. . . . . . . . . . . . . .4 — 2
4-3:
Troubleshooting requiring MGE after-sales support. . . . . . . . . . . . . . . . .4 — 3
5-1:
EX 5/7/11 RT Input and Output Characteristics. . . . . . . . . . . . . . . . . . . .5 — 1
5-2:
Back-up Time ( in minutes). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 — 1
5-3:
Battery Recharge time to recover 90% of the rated backup time
after discharge at full load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 — 2
5-4:
Full load heat rejection in BTU’s/hr. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 — 2
Contents
c v
86-86000-00 A01