Motorola i275 - Manual (Page 48)

38
Direct Talk SM
call, you must use the valid Nextel 10-digit
Personal Telephone Number (PTN) of the person
you are calling. The person you are calling must be
in Direct Talk mode and set to the same channel to
receive your call.
If you receive an error message:
• You may not be using a valid PTN.
• The person that you are trying to reach may not
be in Direct Talk mode.
• The person that you are trying to reach is set to
a different channel or is out of range.
Private Only
To limit Direct Talk to private conversation only, set
your code to Pvt Only. In this mode, code calls will
be ignored and only private calls can be made or
received.
Note: You will be required to enter a valid PTN
before pressing the PTT button.
To set the code to Pvt Only:
1 From the Direct Talk idle screen, press A
under Edit.
2 Scroll to Code.
3 Press
A under Edit.
4 Select Pvt Only.
5 When you are finished, press
A under Back
to return to the idle screen.
Making a Private Direct Talk SM Call
1 Enter the 10-digit PTN of the person you want to
call on your channel. -or-
Scroll to a number or name in Contacts. -or-
Scroll to a number in the recent calls list.
2 Press and hold the PTT button. Begin speaking
after your phone emits the Direct Talk tone.
3 Release the PTT button to listen.
The number or name of the person you are calling
will appear in the first line of the display.
Receiving a Private Direct Talk SM Call
The number or name of the person who initiated
the call will appear in the first line of the display.
Ending a Private Direct Talk SM Call
A private Direct Talk call will end if there is no
communication for 6 seconds.
The display will return to the idle screen.