Monarch Instrument 9400 Series - Manual (Page 96)

Setting the Date
The date setting option lets you set the current date. It also
causes a date prompt to appear at daily startup. The operator
can then enter a date.
At each startup, the printer starts at 01/01/89. The advances
while the power is on. At the next daily startup, the operator
must enter the current date.
1. From the main menu, press D to display Printer
Configuration. Press
E
. You’ll see
Enter password:_____________
Type the 1-8 character password and press
E
.
NOTE: When you first receive the printer, the password is
MANAGER or ONLINE.
2. You’ll see the Configuration Options menu.
Select Config Option:
↓
Define Check Digit Schemes __
Press
D
until you see Set Date. Press
E
to select
this option.
3. You’ll see
Enter new date: 08/09/89
(MM/DD/YY)
4. Enter the month, day, and year. Use leading zeros for
single digits, e.g. 021489 for 02/14/89. Press
E
.
You’ll return to the Configuration Options menu.
Press ! to exit to the main menu.
9400 Series User’s Manual
5-10