Monarch Instrument 9400 Series - Manual (Page 112)

To print human readable characters for Code 39, Interleaved 2
of 5, NW7, Code 128 and MSI bar codes, you must create a
sub-field. See "Sub-fields" later in this section.
NOTES:
1. It is possible to print a UPC-A bar code rotated 180
degrees on 1.2 inch width supply, but the quiet zone will be
less than the minimum specification.
2. Code 39 and Code 128 bar codes accept a space as valid
data. If you are using fixed data for either of these bar
codes, you can use the shift/space key to insert a
(reserved space) in the fixed data.
3. To print human readable characters for UPC and EAN bar
codes, see "Bar Code - Human Readable Characters."
4. To print human readable characters for Code 39,
Interleaved 2 of 5, NW7, Code 128 and MSI bar codes,
you must create a sub-field. See "Sub-fields" later in this
section.
5. If you define a sub-field as a standard UPC or EAN bar
code field, the printer automatically fills the field from the
left with zeros to complete the bar code if necessary. UPC
or EAN +2 or +5 bar codes do not automatically fill from
the left.
9400 Series User’s Manual
6-2